1-800-528-4400sales@brocksupply.comcustomerservice@brocksupply.com

Identifying a 2002-2007 Jeep Liberty Window Regulator

There were 2 types of window regulators installed in the 2006-2007 Jeep Liberty so it is important that you identify the right window regulator in your Liberty before ordering.

While it is possible to determine which window regulator you may have based on your Liberty's build date, a visual inspection is the most accurate way to determine which type of regulator you have.

Below are pictures of the regulator and glass inside the door shell. You will not need to remove them at this time, however you will need to remove the door panel, moisture shield and speaker (rear door only) to see the type of mount your regulator has.

Jeep Liberty Window Regulator Repair Kit - door jamb sticker

You may see this sticker on your door jamb if your 2006 or 2007 vehicle has had Technical Service Bulletin 23-014-08 or Technical Service Bulletin 23-008-09 performed for a faulty regulator. If so, the regulator and glass have been replaced with the Clip Mount type.

Whether or not you see this sticker, a visual inspection is still recommended.

NOTE: The 2002-2005 Jeep Liberty all used the Clip Mount regulator but an inspection is best if your Liberty has been in a collision and a door was replaced with a used part.

 


FRONT AND REAR - CLIP MOUNT TYPE

Jeep Liberty Window Regulator Repair Kit - front clip mount type

 

FRONT CLIP MOUNT TYPE
Part # 2557-0001L or 2557-0001R
Jeep Liberty Window Regulator Repair Kit - rear clip mount type

 

REAR CLIP MOUNT TYPE
WITH SPEAKER REMOVED
Part # 2557-0002L or 2557-0002R

On the Clip Mount type regulator, the glass has a metal bracket attached to it on the bottom that will have studs, 2 for the front regulator and 1 for the rear, which allow it to be secured to the regulator glass guide with clips.

This style glass/regulator combination was used on all 2002-2005 vehicles and 2006 models built before 3/16/06 [we recommend that if you have a 2006 model you perform the visual check regardless of the build date because we have found some reference material where the change occurs as early as 5/2/05 and as late as 2007 models]. This is also the regulator and glass used to replace defective units under Technical Service Bulletins 23-014-08 or 23-008-09.

Applicable Products:

02-07 Jeep Liberty Front LH Window Regulator w/ Motor
02-07 Jeep Liberty Front RH Window Regulator w/ Motor
02-07 Jeep Liberty Rear LH Window Regulator w/ Motor
02-07 Jeep Liberty Rear RH Window Regulator w/ Motor
02-07 Jeep Liberty Rear LH Window Regulator w/o Motor
02-07 Jeep Liberty Rear RH Window Regulator w/o Motor

 

FRONT AND REAR - HOLE MOUNT TYPE

Jeep Liberty Window Regulator Repair Kit - front hole mount type

 

FRONT HOLE MOUNT TYPE
Part # 2557-0003L or 2557-0003R
Jeep Liberty Window Regulator Repair Kit - rear hole mount type

 

REAR HOLE MOUNT TYPE
WITH SPEAKER REMOVED
Part # 2557-0004L or 2557-0004R

On the Hole Mount type regulator, the glass WILL NOT have a metal bracket on the bottom. Instead it has a hole in it that the regulator glass guide snaps into.

Applicable Products:

06-07 Jeep Liberty Front LH Window Regulator w/ Motor
06-07 Jeep Liberty Front RH Window Regulator w/ Motor
06-07 Jeep Liberty Rear LH Window Regulator w/ Motor
06-07 Jeep Liberty Rear RH Window Regulator w/ Motor